Dištančná forma vzdelávania v oblasti strojárskych technológií s využitím moderných IT prostriedkov pre zahraničných študentov

Basic informations

TOP PROJECT

Thematic area: komisia č. 3 pre obsahovú integráciu a diverzifikáciu vysokoškolského štúdia

Project name (Slovak): Dištančná forma vzdelávania v oblasti strojárskych technológií s využitím moderných IT prostriedkov pre zahraničných študentov

Project name (English): Distance form of education for foreign students in the field of manufacturing technologies using modern IT tools

Start of project: 2021

End of project: 2023

Condition of project: Ukončený

Project number: 036TUKE-4/2021

Project leader: prof. Ing. Emil Spišák, CSc.

University: Technická univerzita v Košiciach

Department: Strojnícka fakulta

Financial grant of MŠVVandŠ SR within KEGA

	Financial grant of MŠVVandŠ SR within KEGA	Capital expenditures in €
Pumped for the entire period of the project	40 380,00	0,00

List of project outcomes for the entire solution

Publishing activity

Category code	Specific output, name (ISBN, number of pages a i.)
ACB	SPIŠÁK, Emil - MAJERNÍKOVÁ, Janka - DULEBOVÁ, Ľudmila - TKÁČOVÁ, Jana: Manufacturing Technology - Product Design and Development. Edition of Study Literature, Technical University of Kosice, Faculty of Mechanical Engineering, Letna 9 St., Kosice ISBN: 978-80-553-3739-5, str. 304 , 2021
ADE	Janka Majerníková, Emil Spišák, Samuel Vilkovský, Peter Mulidrán, Gerhard Mitaľ: Evaluation of limit drawing ratio of selected types of steel sheets. The International Journal of Engineering and Science (IJES), 2021, ISSN (e): 2319 – 1813 ISSN (p): 23-19 – 1805, v tlači
V3	Grytsenko, Oleksandr (10%); Dulebová, Ľudmila (65%); Spišák, Emil (20%); Berezhnyy, Bohdan (5%): New Materials Based on Polyvinylpyrrolidone-Containing Copolymers with Ferromagnetic Fillers. Bazilej : ISSN 1996-1944
V3	Moravskyi, Volodymyr (15%); Kucherenko, Anastasiia (10%); Kuznetsova, Marta (5%); Dulebová, Ľudmila (50%); Spišák, Emil (20%): Obtainment and characterization of metal-coated polyethylene granules as a basis for the development of heat storage systems. Bazilej : ISSN 2073-4360
V3	Dulebová, Ľudmila (90%); Grytsenko, Oleksandr (10%): Effect of amount of nanofillers on selected properties of Polyamid/Clay nanocomposites. Košice : ISSN 1337-7094
V3	Vilkovský, Samuel (50%); Majerníková, Janka (50%): Topology Optimization Of The Plastic Holder By Computational Method. Uttar Pradesh : ISSN 2319-1813
V3	Mitaľ, Gerhard (20%); Gajdoš, Ivan (20%); Spišák, Emil (20%); Majerníková, Janka (20%); Jezný, Tomáš (20%): An Analysis of Selected Technological Parameters’ Influences on the Tribological Properties of Products Manufactured Using the FFF Technique. Bazilej : ISSN 2076-3417
V3	Kender, Štefan (50%); Brezinová, Janette (50%): Reverse engineering in automotive design component. Sofia : ISSN 2534-997X
V2	Brezinová, Janette (50%); Sailer, Henrich (50%): Determination of the quality of renovation layers in tribological conditions. 2022 Varna : ISSN 2535-0307
BFA	Viňáš, Ján (25%); Brezinová, Janette (25%); Brezina, Jakub (25%); Sailer, Henrich (25%): Quality Assessment Of Heterogenous Welding Joints Made By GMAW Method. 2020 Rzeszów :
V3	Konovalenko, Ihor (20%); Maruschak, Pavlo O. (5%); Kozbur, Halyna (5%); Brezinová, Janette (30%); Brezina, Jakub (30%); Nazarevich, Bohdan (5%); Shkira, Yaroslav (5%): Influence of uneven lighting on quantitative indicators of surface defects. Basel : ISSN 2075-1702
V3	Vilkovský, Samuel (34%); Majerníková, Janka (33%); Spišák, Emil (33%): Deep drawing of DC04 and dieload analys is using Simufactforming software. Uttar Pradesh : ISSN 2319-1813
V3	Varga, Ján (30%); Ižol, Peter (20%); Kaščák, Ľuboš (20%); Vrabeľ, Marek (20%); Kubit, Andrzej (10%): Comparison of finishing milling strategies using topography of the machined surface. Košice : ISSN 1338-1156
V3	Kaščák, Ľuboš (35%); Varga, Ján (35%); Bidulská, Jana (15%); Bidulský, Róbert (10%); Actis Grande, Marco (5%): Simulation tool for material behaviour prediction in additive manufacturing. Košice : ISSN 1338-1156
V3	Kurylo, Piotr (15%); Frankovský, Peter (15%); Malinowski, Marek (5%); Maciejewski, Tomasz (15%); Varga, Ján (15%); Kostka, Ján (20%); Adrian, Łukasz (5%); Szufa, Szymon (5%); Rusnáková, Svetlana (5%): Data Exchange with Support for the Neutral Processing of Formats in Computer-Aided Design/Computer-Aided Manufacturing Systems. Bazilej : ISSN 2076-3417
V3	Guzanová, Anna (25%); Brezinová, Janette (10%); Varga, Ján (20%); Džupon, Miroslav (5%); Vojtko, Marek (5%); Janoško, Erik (10%); Viňáš, Ján (10%); Draganovská, Dagmar (10%); Hašuľ, Ján (5%): Experimental Study of Steel-Aluminum Joints Made by RSW with Insert Element and Adhesive Bonding. Bazilej : ISSN 1996-1944
V3	Spišák, Emil (10%); Nováková-Marcinčínová, Ema (30%); Nováková-Marcinčínová, Ľudmila (20%); Majerníková, Janka (20%); Mulidrán, Peter (20%): Investigation of the Manufacturing Orientation Impact on the Mechanical Properties of Composite Fiber-Reinforced Polymer Elements in the Fused Filament Fabrication Process. Bazilej : ISSN 2073-4360
V3	Grytsenko, Sergiy (20%); Dulebová, Ľudmila (50%); Spišák, Emil (20%); Pukach, Petro (10%): Metal-Filled Polyvinylpyrrolidone Copolymers: Promising Platforms for Creating Sensors. Bazilej : ISSN 2073-4360
V3	Dulebová, Ľudmila (95%); Grytsenko, Sergiy (5%): Verification of the use of carbon fiber composites for the production of the component. Košice : ISSN 1337-7094
V3	Brezina, Jakub (100%): Quality evaluation of the welded joints made by robotic welding. Sofia : ISSN 2534-997X
	Varga, Ján (16.667%); Ižol, Peter (16.667%); Vrabeľ, Marek (16.666%); Kaščák, Ľuboš (16.667%); Drbúl, Mário (16.666%); Brindza, Jozef (16.667%): Surface Quality Evaluation in the Milling Process Using a Ball Nose End Mill. Bazilej : ISSN 2076-3417
P1	Dulebová, Ľ.: NEKOVOVÉ MATERIÁLY A TECHNOLÓGIE ICH SPRACOVANIA. 2023, SjF TUKE, 218 s., ISBN 978-80-553-4303-7
V3	Ižol, P. et al.: INFLUENCE OF INTERPOLATION PARAMETERS ON THE ACCURACY OF MILLED SURFACES. In: Protechma 2023, s.9-12, TUKE, ISBN 978-80-553-4420-1
V3	Nováková - Marcinčinová, E. et al.: VERIFICATION OF THE INFLUENCE OF THE PRODUCTION METHOD OF A SAMPLE FROM PLA MATERIAL USING RAPID PROTOTYPING TECHNOLOGY ON ITS PROPERTIES. In: Protechma 2023, s.57-60, TUKE, ISBN 978-80-553-4420-1
V3	Varga, J. et all: APPLICATION OF THE SCANNING METHOD IN THE FIELD OF MACHINING. In: Protechma 2023, s.106-109, TUKE, ISBN 978-80-553-4420-1
V2	Moravskyi, Volodymyr (20%); Kucherenko, Anastasiya (10%); Kuznetsova, Marta (5%); Dulebová, Ľudmila (65%): Use of highly crystalline polymers for creation of heat accumulation systems. X-ray structural research. 2023 Košice : ISBN 978-80-553-4420-1
V3	Spišák, E.; Nováková-Marcinčínová, E.; Majerníková, J.; Mulidrán, P.; Nováková-Marcinčínová, L’.: Experimental and Numerical Study of Printing Strategy Impact on the Mechanical Properties of Sustainable PLA Materials. Polymers 2023, 15, 4639. https://doi.org/10.3390/polym15244639
P1	Majerníková, Janka (50%); Mulidrán, Peter (50%); Spišák, Emil (%); Stachowicz, Feliks (%): Optimalizácia procesov v tvárnení.
V2	Vilkovský, Samuel (50%); Majerníková, Janka (50%): Assessment of the effect of blank holding pressure on the formability of DC04 sheet metal using Simufact software. 2023 Košice : ISBN 978-80-553-4369-3
V2	Rohaľ, Vladimír (50%); Spišák, Emil (50%): The quality evaluation of the cutting surface by microscopic analysis. 2023 Košice : ISBN 978-80-553-4369-3
V2	Hajduk, Július (50%); Majerníková, Janka (50%): Evaluation of Mechanical Properties of Selected Types of Thin Steel Sheet. 2023 Košice : ISBN 978-80-553-4369-3

Replications

Category Name	Specific name
1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS	Grytsenko, Oleksandr (10%); Dulebová, Ľudmila (65%); Spišák, Emil (20%); Berezhnyy, Bohdan (5%): New Materials Based on Polyvinylpyrrolidone-Containing Copolymers with Ferromagnetic Fillers. Bazilej : ISSN 1996-1944
1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS	Mitaľ, Gerhard (20%); Gajdoš, Ivan (20%); Spišák, Emil (20%); Majerníková, Janka (20%); Jezný, Tomáš (20%): An Analysis of Selected Technological Parameters’ Influences on the Tribological Properties of Products Manufactured Using the FFF Technique. Bazilej : ISSN 2076-3417
4 - citácie v domácich publikáciách neregistrované v citačných indexoch	Mitaľ, Gerhard (20%); Gajdoš, Ivan (20%); Spišák, Emil (20%); Majerníková, Janka (20%); Jezný, Tomáš (20%): An Analysis of Selected Technological Parameters’ Influences on the Tribological Properties of Products Manufactured Using the FFF Technique. Bazilej : ISSN 2076-3417
3 - citácie v zahraničných publikáciách neregistrované v citačných indexoch	Konovalenko, Ihor (20%); Maruschak, Pavlo O. (5%); Kozbur, Halyna (5%); Brezinová, Janette (30%); Brezina, Jakub (30%); Nazarevich, Bohdan (5%); Shkira, Yaroslav (5%): Influence of uneven lighting on quantitative indicators of surface defects. Basel : ISSN 2075-1702
3 - citácie v zahraničných publikáciách neregistrované v citačných indexoch	Konovalenko, Ihor (20%); Maruschak, Pavlo O. (5%); Kozbur, Halyna (5%); Brezinová, Janette (30%); Brezina, Jakub (30%); Nazarevich, Bohdan (5%); Shkira, Yaroslav (5%): Influence of uneven lighting on quantitative indicators of surface defects. Basel : ISSN 2075-1702
3 - citácie v zahraničných publikáciách neregistrované v citačných indexoch	Konovalenko, Ihor (20%); Maruschak, Pavlo O. (5%); Kozbur, Halyna (5%); Brezinová, Janette (30%); Brezina, Jakub (30%); Nazarevich, Bohdan (5%); Shkira, Yaroslav (5%): Influence of uneven lighting on quantitative indicators of surface defects. Basel : ISSN 2075-1702
1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS	Guzanová, Anna (25%); Brezinová, Janette (10%); Varga, Ján (20%); Džupon, Miroslav (5%); Vojtko, Marek (5%); Janoško, Erik (10%); Viňáš, Ján (10%); Draganovská, Dagmar (10%); Hašuľ, Ján (5%): Experimental Study of Steel-Aluminum Joints Made by RSW with Insert Element and Adhesive Bonding. Bazilej : ISSN 1996-1944
1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS	Guzanová, Anna (25%); Brezinová, Janette (10%); Varga, Ján (20%); Džupon, Miroslav (5%); Vojtko, Marek (5%); Janoško, Erik (10%); Viňáš, Ján (10%); Draganovská, Dagmar (10%); Hašuľ, Ján (5%): Experimental Study of Steel-Aluminum Joints Made by RSW with Insert Element and Adhesive Bonding. Bazilej : ISSN 1996-1944
3 - citácie v zahraničných publikáciách neregistrované v citačných indexoch	Guzanová, Anna (25%); Brezinová, Janette (10%); Varga, Ján (20%); Džupon, Miroslav (5%); Vojtko, Marek (5%); Janoško, Erik (10%); Viňáš, Ján (10%); Draganovská, Dagmar (10%); Hašuľ, Ján (5%): Experimental Study of Steel-Aluminum Joints Made by RSW with Insert Element and Adhesive Bonding. Bazilej : ISSN 1996-1944

Other outcomes (eg e-learning, websites, virtual laboratory, training, courses, workshops and the like.)

Output name	Description of output	Link
Inžinierske materiály - Ing. Ján Varga, PhD.	Prednášky a cvičenia v AJ - Power Point	link iba pre členov
Technology I. - doc. Ing. Jana Tkáčová, PhD.	Prednášky a cvičenia v AJ - Power Point	link iba pre členov
Technology II. - doc. Ing. Janka Majerníková, PhD.	Prednášky v AJ - Power Point	link iba pre členov

Final evaluation of the commission KEGA

Splnil ciele excelentne (s dosiahnutím celospoločenských prínosov).