SK
EN
Vývoj vyspelých e-learningových učebných materiálov na báze aplikácie virtuálnej reality a rapid prototyping
Základné informácie
Tematická oblasť: komisia č. 2 pre nové technológie, metódy a formy vo vzdelávaní
Názov projektu (slovenský): Vývoj vyspelých e-learningových učebných materiálov na báze aplikácie virtuálnej reality a rapid prototyping
Názov projektu (anglický): Development of Advanced E-learning Teaching Materials Based on Applications of Virtual Reality and Rapid Prototyping
Začiatok riešenia projektu: 2012
Koniec riešenia projektu: 2014
Stav projektu: Ukončený
Číslo projektu: 002TUKE-4/2012
Vedúci projektu: prof. Ing. Marek Kočiško, PhD.
Vysoká škola: Technická univerzita v Košiciach
Pracovisko: Fakulta výrobných technológií so sídlom v Prešove
Anotácia originálnych výsledkov riešenia projektu v slovenskom jazyku
Je možné konštatovať, úspešnosť práce členov riešiteľského kolektívu pri dosiahnutí definovaných cieľov projektu.
Na základe úvodných analýz študijných predmetov a následne analýzy existujúcich technológií rozšírenej virtuálnej reality a rapid prototyping bol realizovaný návrh študijných predmetov implementujúci pri výučbe oba tieto technológie.
Pri tvorbe e-learningových učebných materiálov bol využitý rad moderných softvérových nástrojov pre čo najlepšie využitie vizuálnych prvkov vo vzdelávacom procese. Tvorba samotných učebných materiálov si vyžiadala rozpracovanie oboch technológií do samotných detailov a prepojenie výučbových materiálov s reálnym nasadením týchto technológií v laboratórnych podmienkach.
Aplikácia takejto kombinácie získavania vedomosti počas výučby sa ukazuje ako veľmi efektívna a spĺňa nároky študentov pre získavanie vedomosti modernými prostriedkami.
Anotácia originálnych výsledkov riešenia projektu v anglickom jazyku
It can be stated that the members of research team were successful in achieving the defined goals of the project.
On the base of introductory analysis of study subjects and further analyses of existing technologies of virtual reality and rapid prototyping the proposal was elaborated for the study subjects that could implement both these technologies in education process.
For creation of e-learning study materials, the series of modern software tools was used to achieve best possible exploitation of visual elements in education process. Generation of the study texts demanded the detailed elaboration of theory parts for both technologies and interconnection of these materials with real utilization of the technologies in laboratory environment.
Application of such combination of knowledge achieving during the education process seems to be very effective and meets the requirements of the students for being taught by progressive educational tools.
Finančná dotácia z MŠVVaŠ SR v rámci KEGA
| Finančná dotácia z MŠVVaŠ SR v rámci KEGA | Kapitálové výdavky v € | |
|---|---|---|
| Čerpané v roku 2012 | 15 345,00 | 0,00 |
| Čerpané v roku 2013 | 8 640,00 | 0,00 |
| Čerpané v roku 2014 | 12 248,00 | 0,00 |
| Čerpané za celé obdobie riešenia projektu | 36 233,00 | 0,00 |
Zoznam výstupov projektu za celé obdobie riešenia
Publikačná činnosť
| Kód kategórie | Konkrétny výstup, názov (ISBN, počet strán a i.) |
|---|---|
| ADC | MARCINČIN, J. N. - JANÁK, M. - BARNA, J. - TÖRÖK, J. - NOVÁKOVÁ-MARCINČÍNOVÁ, Ľ. - FEČOVÁ, V.: Verification of a Program for the Control of a Robotic Workcell with the Use of AR. International Journal of Advanced Robotic Systems. No. 9, 2012, p. 1-7, ISSN 1729-8806. |
| ADE | MARCINČIN, J. N. - BARNA, J. - JANÁK, M. - FEČOVÁ, V. - NOVÁKOVÁ-MARCINČÍNOVÁ, Ľ.: Composite lay-up process with application of elements of augmented reality. The Engineering Reality of Virtual reality, Vol. 8289, 2012, p. 1-6, ISSN 0277-786X. |
| ADE | NOVÁKOVÁ-MARCINČÍNOVÁ, Ľ. - FEČOVÁ, V. - MARCINČIN, J. N. - JANÁK, M. - BARNA, J.: Effective Utilization of Rapid Prototyping Technology. Materials Science Forum, Vol. 713, 2012, p. 61-66, ISSN 1662-9752 |
| ADE | BARNA, J. - FEČOVÁ, V. - MARCINČIN, J. N. - TOROK, J.: Utilization of Open Source Application in Area of Augmented Reality Assembling Processes. Manufacturing Technology, Vol. 12, No. 12, 2012, p. 2-7, ISSN 1213-2489. |
| ADE | MARCINČIN, J. N. - JANÁK, M. - NOVÁKOVÁ- MARCINČÍNOVÁ, Ľ.: Increasing of Product Quality Produced by Rapid Prototyping Technology. Manufacturing Technology, Vol. 12, No. 12, 2012, p. 71-75, ISSN 1213-2489. |
| ADE | NOVÁKOVÁ-MARCINČÍNOVÁ, Ľ. - JANÁK, M..: Application of Progressive Materials for Rapid Prototyping Technology. Manufacturing Technology, Vol. 12, No. 12, 2012, p. 75-79, ISSN 1213-2489. |
| ADE | MARCINČIN, J. N. - FEČOVÁ, V. - NOVÁKOVÁ- MARCINČÍNOVÁ, Ľ. - JANÁK, M. - BARNA, J. - KOČIŠKO, M.: Virtools and its Application in MOCAP and Creation of the Scripts for Animations of Models. Engineering Review, Vol. 32, No. 2, 2012, p. 96-102, ISSN 1330-9587. |
| ADE | MARCINČIN, J. N. - NOVÁKOVÁ-MARCINČÍNOVÁ, Ľ. - BARNA, J. - JANÁK, M.: Application of FDM rapid prototyping technology in experimental gearbox development process. Tehnicki Vjesnik - Technical Gazette, Vol. 19, No. 3, 2012, p. 689-694, ISSN 1330-3651. |
| ADE | NOVÁKOVÁ-MARCINČÍNOVÁ, Ľ. - FEČOVÁ, V. - MARCINČIN, J. N. - JANÁK, M. - BARNA, J.: Effective utilization of rapid prototyping technology. AIP Conference Proceedings, Vol. 1431, No. 57, 2012, p. 834-841, ISSN 1551-7616. |
| ADE | MARCINČIN, J. N. - BARNA, J. - JANÁK, M.: Application of Augmented Reality for Simulation of Robotized Workcell Activity. World Academy of Science, Engineering and Technology, Vol. 70, 2012, p. 415-418, ISSN 2010-376X. |
| ADE | NOVÁKOVÁ-MARCINČÍNOVÁ, Ľ. - MARCINČIN, J. N.: Testing of Materials for Rapid Prototyping Fused Deposition Modelling Technology. World Academy of Science, Engineering and Technology, Vol. 70, 2012, p. 411-414, ISSN 2010-376X. |
| ADF | MARCINČINOVÁ, Ľ. N.: Progresívne materiály využívané v rýchlej automatizovanej výrobe súčiastok metódou FDM. Strojárstvo Extra, č. 5, Media/ST, Bratislava, 2012, s. 35/1-35/3, ISSN 1335-2938. |
| ADF | MARCINČINOVÁ, Ľ. N.: Advanced materials for fused deposition modelling technology. CA System in Production Process Planning, ŽU, Žilina, 2012, s. 1-5, ISSN 1335-3799. |
| AFC | MARCINČIN, J. N. - BARNA, J. - JANÁK, M. - MARCINČINOVÁ, Ľ. N. - FEČOVÁ, V.: Production Processes with Integration of CA Data in Augmented Reality Environment. In: Proceedings of 16th International Conference on Intelligent Engineering Systems INES 2012, Obuda University Budapest, Lisbon, 2012, p. 77-80, ISBN 978-1-4673-2695-7. |
| AFC | MARCINČINOVÁ, Ľ. N. - MARCINČIN, J. N. - BARNA, J. - TOROK, J.: Special Materials Used in FDM Rapid Prototyping Technology Application. In: Proceedings of 16th International Conference on Intelligent Engineering Systems INES 2012, Obuda University Budapest, Lisbon, 2012, p. 73-76, ISBN 978-1-4673-2695-7. |
| AFC | MARCINČINOVÁ, Ľ. N. - MARCINČIN, J. N.: Production and Testing of Products Realized by Fused Deposition Modelling Technology. In: Proceedings of 4th International Scientific and Expert Conference of the International TEAM Society, Vol. 4, No. 1, Slavonski Brod, 2012, p. 27-30, ISSN 1847-9065. |
| AFC | MARCINČIN, J. N. - BARNA, J. - TOROK, J..: Advanced Augmented Reality Applications in the Production Processes. In: Proceedings of 11th International Scientific Conference on Advanced Production Technologies MMA 2012, Novi Sad, 2012, p. 277-280, ISBN 978-86-7892-419-4. |
| AFC | MARCINČIN, J. N. - MARCINČINOVÁ, Ľ. N.: Production of Parts Realized by FDM Rapid Prototyping Technology and their Testing. In: Proceedings of 11th International Scientific Conference on Advanced Production Technologies MMA 2012, Novi Sad, 2012, p. 473-476, ISBN 978-86-7892-419-4. |
| AFD | FEČOVÁ, V. - MARCINČINOVÁ, Ľ. N. - JANÁK, M. - MARCINČIN, J. N. - BARNA, J. - TOROK, J.: Devices and software possibilities for using of motion tracking systems in the virtual reality system. In: Proceedings of 10th International Symposium on Applied Machine Intelligence and Informatics SAMI 2012, Obuda University Budapest, Herľany, 2012, p. 165-168, ISBN 978-1-4577-0195-5. |
| AFD | FEČOVÁ, V. - BARNA, J. - MARCINČIN, J. N. - JANÁK, M. - MARCINČINOVÁ, Ľ. N. - TOROK, J.: Visualization of Composite Lay-Up Technology with use of Augmented Reality Elements. In: Proceedings of 10th International Symposium on Applied Machine Intelligence and Informatics SAMI 2012, Obuda University Budapest, Herľany, 2012, p. 173-177, ISBN 978-1-4577-0195-5. |
| AFD | MARCINČIN, J. N. - BARNA, J. - JANÁK, M. - MARCINČINOVÁ, Ľ. N. - TOROK, J.: Visualization of Intelligent Assembling Process by Augmented Reality Tools Application. In: 4th IEEE International Symposium on Logistics and Industrial Informatics LINDI 2012, Obuda University Budapest, Smolenice, 2012, p. 33-36, ISBN 978-1-4673-4518-7. |
| AFD | MARCINČIN, J. N. - MARCINČINOVÁ, Ľ. N. - JANÁK, M. - FEČOVÁ, V.: Simulation of Flexible Manufacturing Systems for Logistics Optimization. In: 4th IEEE International Symposium on Logistics and Industrial Informatics LINDI 2012, Obuda University Budapest, Smolenice, 2012, p. 37-40, ISBN 978-1-4673-4518-7. |
| AFD | VOJTKO, I. - FEČOVÁ, V. - KOČIŠKO, M. - MARCINČIN, J. N.: Proposal of Construction and Analysis of Turbine Blades. In: 4th IEEE International Symposium on Logistics and Industrial Informatics LINDI 2012, Obuda University Budapest, Smolenice, 2012, p. 57-80, ISBN 978-1-4673-4518-7. |
| ADE | MARCINČIN, J. N. - BARNA, J. - TOROK, J.: Advanced Augmented Reality Applications in the Production Processes. Journal of Production Engineering, Vol.16, No. 1, 2013, p. 39-42, ISSN 1821-4932. |
| ADE | MARCINČINOVÁ, Ľ. N. - MARCINČIN, J. N. - JANÁK, M.: Intelligent Control of Robotized Workcell by Augmented Reality Application. World Academy of Science, Engineering and Technology, Vol. 81, No. 81, 2013, p. 1267-1270, ISSN 2010-3778. |
| ADE | MARCINČIN, J. N. - MARCINČINOVÁ, Ľ. N.: Application of Augmented Reality Technologies in Virtual Manufacturing. Academic Journal of Manufacturing Engineering, Vol. 11, No. 4, 2013, p. 48-51, ISSN 1583-7904. |
| ADE | MARCINČINOVÁ, Ľ. N. - MARCINČIN, J. N.: Selected Testing for Rapid Prototyping Technology Operation. Applied Mechanics and Materials, Vol.. 308, No. 1, 2013, p. 25-31, ISSN 1662-7482. |
| ADE | MARCINČIN, J. N. - JANÁK, M. - FEČOVÁ, V. - MARCINČINOVÁ, Ľ. N.: Utilization of Augmented Reality Elements for Visualization of Operational States of Manufacturing Devices. Applied Mechanics and Materials, Vol.. 308, No. 1, 2013, p. 111-114, ISSN 1662-7482. |
| ADE | MARCINČIN, J. N. - FEČOVÁ, V. - MARCINČINOVÁ, Ľ. N. - TOROK, J. - BARNA, J.: Verification of Machine Position in Production Plant with Use of Virtual Reality Technology. Applied Mechanics and Materials, Vol.. 308, No. 1, 2013, p. 171-174, ISSN 1662-7482. |
| ADE | MARCINČIN, J. N. - BARNA, J. - TOROK, J. - JANAK, M.: Visual Reconstruction and Optimization of Real Wokplace on the Base of Spatial Digitisation. Applied Mechanics and Materials, Vol.. 308, No. 1, 2013, p. 175-178, ISSN 1662-7482. |
| ADE | MARCINČINOVÁ, Ľ. N. - MARCINČIN, J. N.: Testing of the ABS Materials for Application in Fused Deposition Modeling Technology. Applied Mechanics and Materials, Vol.. 309, No. 1, 2013, p. 133-140, ISSN 1662-7482. |
| ADE | MARCINČIN, J. N.: Virtual Reality Modeling Language as Tool for Automated Workplaces Simulation. Applied Mechanics and Materials, Vol.. 309, No. 1, 2013, p. 372-379, ISSN 1662-7482. |
| ADE | MARCINČIN, J. N. - FEČOVÁ, V. - BARNA, J. - JANÁK, M. - MARCINČINOVÁ, Ľ. N.: Using of the virtual reality application with the scanning device Kinect for manufacturing processes planning. Manufacturing Technology, Vol. 13, No. 2, 2013, p. 215-219, ISSN 1213-2489. |
| ADE | MARCINČINOVÁ, Ľ. N. - MARCINČIN, J. N. - TOROK, J. - BARNA, J.: Selected experimental tests of materials used in rapid prototyping area. Manufacturing Technology, Vol. 13, No. 2, 2013, p. 220-226, ISSN 1213-2489. |
| ADE | MARCINČINOVÁ, Ľ. N. - MARCINČIN, J. N.: Experimental testing of materials used in fused deposition modeling rapid prototyping technology. Advanced Materials Research, Vol. 740, No. 740, 2013, p. 597-602, ISSN 1022-6680. |
| ADE | MARCINČIN, J. N. - MARCINČINOVÁ, Ľ. N.: Advanced techniques for NC programs preparation. Applied Mechanics and Materials, Vol. 389, No. 389, 2013, p. 726-729, ISSN 1660-9336. |
| ADF | MARCINČINOVÁ, Ľ. N.: Využívanie technológií Rapid Prototyping. Strojárstvo, roč. 17, č. 3, Media/ST, Žilina, 2013, s. 56-57, ISSN 1335-2938. |
| ADF | MARCINČIN, J. N., JANAK, M., BARNA, J., MARCINČINOVÁ, Ľ. N.: Výroba chápadla robota pomocou Rapid Prototyping. Strojárstvo, roč. 17, č. 4, Media/ST, Žilina, 2013, s. 100-101, ISSN 1335-2938. |
| ADF | MARCINCIN, J. N. - MARCINČINOVÁ, Ľ. N.: Human Factors in Virtual Reality Technologies. CA Systems in Production Planning, roč. 14, č. 1, ŽU, Žilina, 2013, s. 23-26, ISSN 1335-3799. |
| ADF | MARCINČINOVÁ, Ľ. N.: Increasing of the Reinforced Materials Properties of Parts Produced by Rapid Prototyping. CA Systems in Production Planning, roč. 14, č. 1, ŽU, Žilina, 2013, s. 27-30, ISSN 1335-3799. |
| AFC | MARCINČIN, J. N. - JANAK, M. - BARNA, J. - MARCINČINOVÁ, Ľ. N.: Design and Verification of the Industrial Robot Effector with Use of Rapid Prototyping Method. In: Proceedings of 8th IEEE International Symposium on Applied Computational Intelligence and Informatics SACI 2013, Timisoara, 2013, p. 99-102, ISBN 978-1-4673-6398-3. |
| AFC | MARCINČIN, J. N. - JANAK, M. - BARNA, J. - MARCINČINOVÁ, Ľ. N.: Visualization of Robot Workcell Activity by Augmented Reality Technology Application. In: Recent Advances in computer Science and Applications. Proceedings of 4th International Conference on Applied Informatics and Computing Theory AICT 2013, Valencia, 2013, p. 13-18, ISSN 1790-5109, ISBN 978-960-474-317-9. |
| AFC | MARCINČIN, J. N. - JANÁK, M. - BARNA, J. - MARCINČINOVÁ, Ľ. N.: Control of Industrial Robots by Augmented Reality and open Source Software Application. In: 5th IEEE International Symposium on Logistics and Industrial Informatics LINDI 2013, Obuda University Budapest, Wildau, 2013, p. 41-44, ISBN 978-1-4799-1257-5. |
| AFC | MARCINČIN, J. N. - TOROK, J. - JANÁK, M. - BARNA, J. - MARCINČINOVÁ, Ľ. N.: New Trends of Three Dimensional Data Representation for Augmented Reality. In: 5th IEEE International Symposium on Logistics and Industrial Informatics LINDI 2013, Obuda University Budapest, Wildau, 2013, p. 45-48, ISBN 978-1-4799-1257-5. |
| AFD | MARCINČIN, J. N. - BARNA, J. - TOROK, J. - MARCINČINOVÁ, Ľ. N.: Definition of Computer Aided Manufacturing Engineering and its Place in CA Systems Chain. In: Proceedings of 11th International Symposium on Applied Machine Intelligence and Informatics SAMI 2013, Obuda University Budapest, Herľany, 2013, p. 263-266, ISBN 978-1-4673-5927-6. |
| AFD | MARCINČIN, J. N.: Virtual Reality, Augmented Reality, Virtual Manufacturing Technologies. In: Proceedings of 14th International Scientific Conference „Automation in Production Planning and Manufacturing“, SjF ŽU Žilina, Turčianske Teplice, 2013, p. 121-123, ISBN 978-80-89276-41-7. |
| AFD | MARCINČINOVÁ, Ľ. N.: Testing of ABS Material for Fused Deposition Modelling RP Technology. In: Proceedings of 14th International Scientific Conference „Automation in Production Planning and Manufacturing“, SjF ŽU Žilina, Turčianske Teplice, 2013, p. 124-127, ISBN 978-80-89276-41-7. |
| ADM | MARCINČIN, J. N.: Development of molding tool with augmented reality technology application. In: Applied Mechanics and Materials. Vol. 442 (2014), p. 203-208. - ISSN 1660-9336 |
| ADM | MARCINČIN, J. N. - TOROK, J. - MARCINČINOVÁ, Ľ. N.: New possibility of visualization in mechanical engineering. In: Applied Mechanics and Materials. Vol. 442 (2014), p. 209-215. - ISSN 1662-7482 |
| ADM | MARCINČIN, J. N. MARCINČINOVÁ, Ľ. N.: Collision detection application for virtual and augmented reality aided manufacturing system. In: Applied Mechanics and Materials. Vol. 464 (2014), p. 338-344. - ISSN 1660-9336 |
| ADM | MARCINČIN, J. N. MARCINČINOVÁ, Ľ. N.: Rapid prototyping in developing process with CA systems application. In: Applied Mechanics and Materials. Vol. 464 (2014), p. 399-405. - ISSN 1660-9336 |
| ADM | MARCINČIN, J. N. MARCINČINOVÁ, Ľ. N.: Production of composite material by FDM rapid prototyping technology. In: Applied Mechanics and Materials : Novel Trends in Production Devices and Systems. Vol. 474 (2014), p. 186-191. - ISSN 1662-7482 |
| ADM | MARCINČIN, J. N. - TOROK, J. - BARNA, J.: Precision assembly process with augmented reality technology support. In: Key Engineering Materials. Vol. 581 (2014), p. 106-111. - ISSN 1662-9795 |
| ADM | MARCINČINOVÁ, Ľ. N. - MARCINČIN, J. N. - JANÁK, M.: Precision manufacturing process of parts realized by FDM rapid prototyping. In: Key Engineering Materials. Vol. 581 (2014), p. 292-297. - ISSN 1662-979 |
| ADM | MARCINČIN, J. N. - JANÁK, M. - BARNA, J. - MARCINČINOVÁ, Ľ. N.: Application of virtual and augmented reality technology in education of manufacturing engineers. In: Advances in Intelligent Systems and Computing. Vol. 276, no. 2 (2014), p. 439-446. - ISSN 2194-5357 |
| ADM | MARCINČINOVÁ, Ľ. N. - MARCINČIN, J. N.: Production of ABS-Aramid Composite Material by Fused Deposition Modeling Rapid Prototyping System. In: Manufacturing Technology. Vol. 14, no. 1 (2014), p. 85-91. - ISSN 1213-2489 |
| ADM | MARCINČINOVÁ, Ľ. N. - MARCINČIN, J. N.: Testing of ABS Material Tensile Strength for Fused Deposition Modeling Rapid Prototyping Method. In: Advanced Materials Research. Vol. 912-914 (2014), p. 370-374. - ISSN 1022-668 |
| ADM | MARCINČIN, J. N. - SZENTIVANYI, P. - JANÁK, M. - BARNA, J.: Diagnostic of Manufacturing Devices Operational States by Smart-Phone Application with Use of Augmented Reality Methods. In: Applied Mechanics and Materials : Operation and Diagnostics of Machines and Production Systems Operational States 2. Vol. 616 (2014), p. 3-10. - ISSN 1662-7482 |
| ADM | MARCINČIN, J. N. - TOROK, J. - JANÁK, M. - MARCINČINOVÁ, Ľ. N.: Interactive Monitoring of Production Process with Use of Augmented Reality Technology. In: Applied Mechanics and Materials : Operation and Diagnostics of Machines and Production Systems Operational States 2. Vol. 616 (2014), p. 19-26. - ISSN 1662-7482 |
| ADM | BARON, P. - ŠOLTÉSOVÁ, S. - KOČIŠKO, M.: The development of a knowledge based system for the process of risk assessment in the workplace. In: Applied Mechanics and Materials. No. 446-447 (2014), p. 1314-1320. - ISSN 1660-9336 |
| AAB | MARCINČINOVÁ, Ľ. N. - MARCINČIN, J. N.: 13 Zlepšovanie mechanických vlastností súčiastok vyrábaných technológiou Rapid Prototyping. 1. vyd. - Košice : TU - 2013. - 76 s.. - ISBN 978-80-553-1519-5 |
Ohlasy
| Názov kategórie | Konkrétny názov |
|---|---|
| 1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | VASILKO, Karol - NOVÁK-MARCINČIN, Jozef - HAVRILA, Michal: Výrobné inžinierstvo / - Vranov nad Topľou : ELIBROL, - 2011. - 420 s.. - ISBN 978-80-89528-09-07. |
| 1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | NOVÁK-MARCINČIN, Jozef - BRÁZDA, Peter - JANÁK, Miroslav - KOČIŠKO, Marek: Application of virtual reality technology in simulation of automated workplaces / - 2011. In: Tehnički vjesnik. Vol. 18, no. 4 (2011), p. 577-580. - ISSN 1330-3651 |
| 1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Novak-Marcincin, J., Barna, J., Novakova- Marcincinova, L., Fecova, V.: Analyses and solutions on technical and economical aspects of rapid prototyping technology (2011) Tehnicki Vjesnik , 18 (4), pp. 657-661. |
| 1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | MARCINČIN, J. N. - DOLIAK, M. - HLOCH, S. - ERGIC, T.: Application of the Virtual Reality Modelling Language to Computer Aided Robot Control Systém ROANS. Strojarstvo, Vol. 52, No. 2, 2010, pp. 227-232, ISSN 0562-1887. |
| 1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Novak-Marcincin, J.; Janak, M.; Novakova- Marcincinova, L. Increasing of product quality produced by rapid prototyping technology. // Manufacturing Technology. 12, 12(2012), pp. 71-75 |
| 1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Kočiško, M., Novák-Marcinčin, J., Baron, P., Dobránsky, J.: Utilization of progressive simulation software for optimization of production systems in the area of small and medium companies. Tehnicki Vjesnik, vol. 19, no. 4, 2012, pp. 983-986, ISSN 1330-3651. |
| 1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Novak-Marcincin, J., Janak, M., Barna, J., Torok, J., Novakova-Marcincinova, L., Fecova, V.: Verification of a program for the control of a robotic workcell with the use of AR. International Journal of Advanced Robotic Systems, vol. 9, art. no. 54, 2012, ISSN 1729-8806. |
| 1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Novak-Marcincin, J., Janak, M., Barna, J., Torok, J., Novakova-Marcincinova, L., Fecova, V.: Verification of a program for the control of a robotic workcell with the use of AR. International Journal of Advanced Robotic Systems, vol. 9, art. no. 54, 2012, ISSN 1729-8806. |
| 1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Hosovsky, A., Novak-Marcincin, J., Pitel, J., Borzikova, J., Zidek, K.: Model-based Evolution of a Fast Hybrid Fuzzy Adaptive Controller for a Pneumatic Muscle Actuator. International Journal of Advanced Robotic Systems. Vol. 9, No. 56, 2012, p. 1-11, ISSN 1729-8806. |
| 1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Novak-Marcincin, J., Janak, M., Novakova- Marcincinova, L., Fecova, V.: Possibility of a quick check on milling strategy suitability. Tehnicki Vjesnik, vol. 19, no. 4, 2012, pp. 959-964, ISSN 1330-3651. |
| 1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Panda, A., Duplák, J., Vasilko, K.: Comprehensive identification of durability for selected cutting tool applied on the base of taylor dependence. Advanced Materials Research, Vol. 716, 2013, p. 254-260, ISSN 1022-6680. |
| 1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Novak-Marcincin, J., Novakova- Marcincinova, L., Janak, M., Fecova, V.: Simulation of flexible manufacturing systems for logistics optimization. LINDI 2012 - 4th IEEE International Symposium on Logistics and Industrial Informatics, art. no. 6319506, 2012, pp. 37-40, ISBN 978-146734519-4. |
| 2 - citácie v domácich publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Marcincin, J. N. - Barna, J. - Janak, M. - Marcincinova, Ľ. N. - Torok, J.: Visualization of Intelligent Assembling Process by Augmented Reality Tools Application. In: 4th IEEE International Symposium on Logistics and Industrial Informatics LINDI 2012, Obuda University Budapest, Smolenice, 2012, p. 33-36, ISBN 978-1-4673-4518-7. |
| 2 - citácie v domácich publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Marcincin, J. N. - Barna, J. - Marcincinova, Ľ. N. - Fecova, V.: Analyses and Solutions on Technical and Economical Aspects of Rapid Prototyping Technology. Tehnički vjesnik, Vol. 18, No. 4, 2011, pp. 657-661, ISSN 1330-3651. |
| 2 - citácie v domácich publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Marcincin, J. N. - Janak, M. - Novakova- Marcincinova, Ľ.: Increasing of Product Quality Produced by Rapid Prototyping Technology. Manufacturing Technology, Vol. 12, No. 12, 2012, p. 71-75, ISSN 1213-2489. |
| 1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Novak-Marcincin, J.M.: Virtual Reality Modeling Language as Tool for Automated Workplaces Simulation / Jozef Novák-Marcinčin - 2013. In: Applied Mechanics and Materials. Vol. 309 (2013), p. 372-379. - ISSN 1662-748 |
| 1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Novak-Marcincin, J., Fecova, V., Barna, J., Janák, M., Novakova- Marcincinova, L.: Using of the virtual reality application with the scanning device Kinect for manufacturing processes planning. In: Manufacturing Technology. Vol. 13, no. 2 (2013), p. 215-219. - ISSN 1213-248 |
Iné výstupy (napr. e-learning, webové stránky, virtuálne laboratórium, školenia, kurzy, workshop a pod.)
| Názov výstupu | Opis výstupu | Link |
|---|---|---|
| Laboratórium technológií virtuálnej a rozšírenej reality | Doplnenie existujúceho laboratória virtuálnej a rozšírenej reality o novovyvinuté 3D polohovacie a 3D zobrazovacie zariadenia | www.tuke.sk/fvtpo |
Záverečné hodnotenie príslušnej komisie KEGA
Splnil ciele výborne.