Vplyv teploty a iných parametrov na ťahové vlastnosti kompozitov a polymérov pri cyklickom jedno a dvojosom zaťažení
Základné informácie
Tematická oblasť: komisia č. 3 pre obsahovú integráciu a diverzifikáciu vysokoškolského štúdia
Názov projektu (slovenský): Vplyv teploty a iných parametrov na ťahové vlastnosti kompozitov a polymérov pri cyklickom jedno a dvojosom zaťažení
Názov projektu (anglický): The influence of temperature and other parameters on the tensile properties of polymer composites and polymers under the uniaxial and biaxial cyclic loading
Začiatok riešenia projektu: 2019
Koniec riešenia projektu: 2021
Stav projektu: Ukončený
Číslo projektu: 002TnUAD-4/2019
Vedúci projektu: prof. Ing. Jan Krmela, Ph.D.
Vysoká škola: Trenčianska univerzita Alexandra Dubčeka v Trenčíne
Pracovisko: Fakulta priemyselných technológií v Púchove
Finančná dotácia z MŠVVaŠ SR v rámci KEGA
Finančná dotácia z MŠVVaŠ SR v rámci KEGA | Kapitálové výdavky v € | |
---|---|---|
Čerpané za celé obdobie riešenia projektu | 31 438,68 | 0,00 |
Zoznam výstupov projektu za celé obdobie riešenia
Publikačná činnosť
Kód kategórie | Konkrétny výstup, názov (ISBN, počet strán a i.) |
---|---|
ADM | Soukup, Josef (5%); Krmela, Jan (70%); Krmelová, Vladimíra (15%); Skočilásová, Blanka (5%); Artyukhov, Artem E. (5%): FEM model of structure for weightlifting in CrossFit in terms of material parameters. Ústí nad Labem : ISSN 1213-2489 |
AFC | Krmela, Jan (90%); Krmelová, Vladimíra (10%): Computational modelling of belt of tire-casing. 2018 Jelgava : ISSN 1691-5976 |
ABC | Artyukhov, Artem; Artyukhova, Nadiia; Ostroha, Ruslan; Yukhymenko, Mykola; Bocko, Jozef; Krmela, Jan: Convective Drying in the Multistage Shelf Dryers: Theoretical Bases and Practical Implementation [Online]. Drying Unit Operations. Israel Pala-Rosas (Ed.), IntechOpen, kapitola DOI: 10.5772/intechopen.89118. ISBN 978-1-83880-110-6. Print ISBN 978-1-83880-109-0. Dostupné z: https://www.intechopen.com/online-first/convective-drying-in-the-multistage-shelf-dryers-theoretical-bases-and-practical-implementation 1,04 AH (kapitola má 21 stran, na straně 20 jsou uvedeni autoři) |
ADM | Artyukhova, Nadiia (50%); Krmela, Jan (50%): Nanoporous structure of the ammonium nitrate granules at the final drying: The effect of the dryer operation mode. Sumy : ISSN 2306-4277 |
ADM | Artyukhov, Artem E. (33.334%); Krmela, Jan (33.333%); Gavrylenko, O.M. (33.333%): Evaluation of the impact made by the hydrodynamic regime of the granulation equipment operation on the nanoporous structure of N4HNO3 granules. Sumy : ISSN 2306-4277 |
ADC | Sklabinskiy, Vsevolod; Artyukhov, Artem; Kononenko, Mykola; Krmela, Jan: Decay of the melt stream during dispersion in granulation devices. Hem. Ind. 73. 2019. DOI: https://doi.org/10.2298/HEMIND190422025S Publikované v online verzi CC časopisu, v tlači. WOS, IF 0,566, Q4. SCOPUS. https://www.ache-pub.org.rs/index.php/HemInd/article/view/534 (publikace má rozsah 16 stran) |
AEC | Krmela, Jan; Krmelová, Vladimíra: Computational modeling of rubber composite. In: PETROCHEMISTRY 2019. Minsk, Bělorusko, 2019, s. 142-144. ISBN 978-985-530-797-7 |
AFH | Artyukhov, Artem; Artyukhova, Nadiia; Krmela, Jan; Krmelová, Vladimíra: Complex designing of granulation units with application of computer and software modeling: case "Vortex granulator". In: The 24th Slovak-Polish Scientific Conference with International Participation on Machine Modelling and Simulations 2019. Liptovský Ján: TnUAD, 2019, s. 23. ISBN 978-80-8075-869-1 |
AFH | Artyukhov, Artem; Artyukhova, Nadiia; Krmela, Jan; Krmelová, Vladimíra: Granulation machines with highly turbulized flows: Creation of software complex for technological design. In: The 24th Slovak-Polish Scientific Conference with International Participation on Machine Modelling and Simulations 2019. Liptovský Ján: TnUAD, 2019, s. 24. ISBN 978-80-8075-869-1 |
AFH | Babrova, Valeryia; Kasperovich, Andrei; Krmela, Jan; Krmelová, Vladimíra: Elastomer modification by means of ionizing radiation. In: The 24th Slovak-Polish Scientific Conference with International Participation on Machine Modelling and Simulations 2019. Liptovský Ján: TnUAD, 2019, s. 62-63. ISBN 978-80-8075-869-1 |
AFG | Krmelová, Vladimíra; Gavendová, Mária; Zatroch, Tomáš; Krmela, Jan; Dubec, Andrej; Bizubová, Bibiana; Kleščík, Michal; Balogová, Alena; Rivera Pedraza, Luis Alberto: Structure and properties of nucleated polypropylene fibers. In: The 24th Slovak-Polish Scientific Conference with International Participation on Machine Modelling and Simulations 2019. Liptovský Ján: TnUAD, 2019, s. 70. ISBN 978-80-8075-869-1 |
AFH | Legerská, Jela; Krmela, Jan; Ondrušová, Darina: Evaluation of heat and dynamic moisture transfer of knitted fabrics. In: The 24th Slovak-Polish Scientific Conference with International Participation on Machine Modelling and Simulations 2019. Liptovský Ján: TnUAD, 2019, s. 72. ISBN 978-80-8075-869-1 |
AFH | Skalková, Petra; Dubec, Andrej; Pagáčová, Jana; Krmela, Jan; Martinec, Jakub: Surface properties of non-black fillers. In: The 24th Slovak-Polish Scientific Conference with International Participation on Machine Modelling and Simulations 2019. Liptovský Ján: TnUAD, 2019, s. 74. ISBN 978-80-8075-869-1 |
AEC | Kopal, Ivan (14.29%); Vršková, Juliána (14.285%); Harničárová, Marta (14.285%); Valíček, Jan (14.285%); Ondrušová, Darina (14.285%); Krmela, Jan (14.285%); Hybler, Peter (14.285%): ATR-FTIR Analysis of Melamine Resin, Phenol-Formaldehyde Resin and Acrylonitrile-Butadiene Rubber Blend Modified by High-Energy Electron Beam Radiation. 2020 Cham : ISBN 978-3-030-39062-4 |
AEC | Krmelová, Vladimíra (11.112%); Kopal, Ivan (11.111%); Gavendová, Mária (11.111%); Labaj, Ivan (11.111%); Krmela, Jan (11.111%); Harničárová, Marta (11.111%); Valíček, Jan (11.111%); Hybler, Peter (11.111%); Zatroch, Tomáš (11.111%): A Study of the Effect of the Quinacridone Pigment Content and Storage Time on the Process of Crystallization of Pre-oriented Polypropylene/Quinacridone Fibres. 2020 Cham : ISBN 978-3-030-39062-4 |
AFD | Bobrova, V.V. (20%); Kasperovich, Andrei (20%); Mozyrev, A. (20%); Krmela, Jan (20%); Krmelová, Vladimíra (20%): Elastomer modification by means of ionizing radiation. 2020 Bristol : ISSN 1757-899X |
AFD | Krmelová, Vladimíra (12.5%); Gavendová, Mária (12.5%); Zatroch, Tomáš (12.5%); Krmela, Jan (12.5%); Dubec, Andrej (12.5%); Bizubová, Bibiána (12.5%); Kleščík, Michal (12.5%); Balogová, Alena (12.5%): Structure and properties of nucleated polypropylene fibres. 2020 Bristol : ISSN 1757-899X |
AFD | Legerská, Jela (33.334%); Ondrušová, Darina (33.333%); Krmela, Jan (33.333%): Evaluation of thermal insulation properties and dynamic moisture transfer of knitted fabrics. 2020 Bristol : ISSN 1757-899X |
AFD | Skalková, Petra (20%); Dubec, Andrej (20%); Pagáčová, Jana (20%); Krmela, Jan (20%); Martinec, Jakub (20%): Surface properties of non-black fillers. 2020 Bristol : ISSN 1757-899X |
AFD | Artyukhov, Artem E. (25%); Artyukhova, Nadiia (25%); Krmela, Jan (25%); Krmelová, Vladimíra (25%): Granulation machines with highly turbulized flows: creation of software complex for technological design. 2020 Bristol : ISSN 1757-899X |
ADM | Sklabinsky, Vsevolod (25%); Artyukhov, Artem E. (25%); Kononenko, Mykola (25%); Krmela, Jan (25%): Decay of the melt stream during dispersion in granulation devices. Belehrad : ISSN 2217-7426 |
AFC | Artyukhov, Artem E. (50%); Krmela, Jan (50%): The Stabilization of the Drop Formation Process in the Vortex Granulator. 2019 Lviv : ISSN 2618-0227 |
AFC | Artyukhova, Nadiia (50%); Krmela, Jan (50%): Improvement of the Convective Drying Efficiency in Devices with Weighted Layer: Multistage Drying in the Shelf Devices. 2019 Lviv : ISSN 2618-0227 |
AFD | Artyukhov, Artem E. (25%); Artyukhova, Nadiia (25%); Krmela, Jan (25%); Krmelová, Vladimíra (25%): Complex designing of granulation units with application of computer and software modeling: case “Vortex granulator”. 2020 Bristol : ISSN 1757-899X |
ADC | Matejíčka, Ladislav (100%): On a Conjecture of Alzer, Berg, and Koumandos. Bazilej : ISSN 2227-7390 |
AFG | Artyukhov, Artem E. (50%); Krmela, Jan (50%): Multilayer granules ofammonium nitrate with nanostructured porous layers: technology of production and indicators of quality. 2019 Kijev : ISBN 978-966-02-9004-4 |
AFG | Artyukhova, Nadiia (33.334%); Krmela, Jan (33.333%); Krmelová, Vladimíra (33.333%): Final drying of ammonium nitrate granules with nanoporous structure in multistage shelf devices: constructive design and technological pameters. 2019 Kijev : ISBN 978-966-02-9004-4 |
ADM | Bakošová, Alžbeta (33.334%); Krmela, Jan (33.333%); Handrik, Marián (33.333%): Computing of truss structure using MATLAB. Ústí nad Labem : ISSN 1213-2489 |
ADM | Pozovnyi, Oleksandr (20%); Zahorulko, Andryi (20%); Krmela, Jan (20%); Artyukhov, Artem E. (20%); Krmelová, Vladimíra (20%): Calculation of the Characteristics of the Multi-gap Seal of the Centrifugal Pump, in Dependence on the Chambers’ Sizes. Ústí nad Labem : ISSN 1213-2489 |
AFC | Artyukhova, Nadiia (20%); Ostroha, Ruslan (20%); Yukhymenko, Mykola (20%); Krmela, Jan (20%); Krmelová, Vladimíra (20%): Final drying of the porous ammonium nitrate in the shelf dryers: impact of the granules flow constraint degree on the nanoporous structure quality. 2019 Sumy : ISBN 978-1-7281-2830-6 |
ABC | Artyukhov, Artem E. (25%); Krmela, Jan (25%); Artyukhova, Nadiia (25%); Ostroha, Ruslan (25%): Modeling of the aerodisperse systems hydrodynamics in devices with directional motion of the fluidized bed. 2020 Hershey : ISBN 978-1-7998-3479-3 |
ADC | Kopal, Ivan (20%); Harničárová, Marta (20%); Valíček, Jan (20%); Krmela, Jan (20%); Lukáč, Ondrej (20%): Radial basis function neural network-based modeling of the dynamic thermo-mechanical response and damping behavior of thermoplastic elastomer systems. Bazilej : ISSN 2073-4360 |
AEC | Harničárová, Marta (16%); Valíček, Jan (12%); Kušnerová, Milena (12%); Kopal, Ivan (12%); Litecká, Juliána (12%); Kadnár, Milan (12%); Kmec, Ján (12%); Palková, Zuzana (12%): Prediction of shortening and material grain size after extrusion using the ecap method. 2020 Baech : ISBN 978-3-0357-3546-8 |
ADC | Kopal, Ivan; Vršková, Juliána; Bakošová, Alžbeta; Harničárová Marta; Labaj Ivan; Darina Ondrušová; Jan Valíček; Jan Krmela: Modelling the stiffness-temperature dependence of resin-rubber blends cured by high-energy electron beam radiation using global search genetic algorithm. - paper has been officially accepted for publication - viz. příloha Kopal_a_kol__Acceptance-Certificate-polymers-981850.pdf. V poděkování je uvedený i tento projekt KEGA 002TnUAD-4/2019. CC, Polymers, ISSN 2073-4360, Q1. |
ADC | Matejíčka, Ladislav (100%): A Solution to Fourth Qi’s Conjecture on a Complete Monotonicity. Probl. Anal. Issues Anal. (="Problemy Analiza - Issues of Analysis"), 2020, Vol. 9 (27), No 3. ISSN 2306-3432 (Online), ISSN 2306-3424 (Print), Q3 - publikace přijatá a již plně uveřejněná, vyjde v v rámci listopadového čísla č. 3 v tomto roce. http://issuesofanalysis.petrsu.ru/journal/content_list_en.php?id=13519 http://issuesofanalysis.petrsu.ru/article/genpdf.php?id=8030&lang=en |
AFC | Artyukhov, Artem E.; Krmela, Jan: Multilayer Granules of Ammonium Nitrate with Nanostructured Porous Layers: Production Technology and Quality Indicators (Багатошарові ґранули аміячної селітри з наноструктурованими пористими шарами: технологія виробництва та показники якости). In: Nanosistemi, Nanomateriali, Nanotehnologii (Nanosystems, Nanomaterials, Nanotechnologies), 2020, 403–420, ISSN: 1816-5230. (ukrajinsky) https://www.imp.kiev.ua/nanosys/en/articles/2020/2/nano_vol18_iss2_p403p420_2020_abstract.html |
AFC | Artyukhova, Nadiia O.; Krmela, Jan; Krmelová, Vladimíra: Final Drying of Ammonium Nitrate Granules with Nanoporous Structure in Multistage Shelf Apparatuses: Embodiment and Technological Parameters (Фінальне сушіння ґранул аміячної селітри з нанопористою структурою в багатоступеневих поличних апаратах: конструктивне виконання та технологічні параметри). In: Nanosistemi, Nanomateriali, Nanotehnologii (Nanosystems, Nanomaterials, Nanotechnologies), 2020, 421–436, ISSN: 1816-5230. (ukrajinsky) https://www.imp.kiev.ua/nanosys/en/articles/2020/2/nano_vol18_iss2_p421p436_2020_abstract.html |
AAA | Krmela, Jan (100%); Beneš, Libor (%); Jilek, Petr (%); Ulewicz, Robert (%): Vliv teploty a jiných parametrů na tahové vlastnosti kompozitů s polymery a polymerů při cyklickém zatížení. |
AAA | Krmela, Jan (100%); Ulewicz, Robert (%); Beneš, Libor (%); Jilek, Petr (%): The Influence of Temperature and Other Parameters on the Tensile Properties of Polymer Composites and Polymers under Cyclic Loading. |
ACA | Krmela, Jan (100%); Beneš, Libor (%); Artyukhov, Artem E. (%); Kasperovich, Andrei (%): Experiments and computational modelling of tires. |
ACA | Krmela, Jan (100%); Stachurek, Iwona (%); Artyukhova, Nadiia (%): Ergonomics modify conditions of work and the safety at work. |
BCI | Krmela, Jan (100%); Jilek, Petr (%): Konstrukce silničních vozidel – vybrané výpočty podvozkové části automobilů. |
BCI | Krmela, Jan (100%); Jilek, Petr (%): Dynamika – výpočet přejezdu tahače přes nerovnost. |
ACB | Krmela, Jan (33.334%); Stodola, Jiří (33.333%); Pešlová, Františka (33.333%); Beneš, Libor (%); Schmidtová, Eva (%): Technické problémy strojních součástí – opotřebení. |
ADM | Soukup, Josef (5%); Krmela, Jan (70%); Krmelová, Vladimíra (15%); Skočilásová, Blanka (5%); Artyukhov, Artem E. (5%): FEM model of structure for weightlifting in CrossFit in terms of material parameters. Ústí nad Labem : ISSN 1213-2489 |
AFC | Krmela, Jan (90%); Krmelová, Vladimíra (10%): Computational modelling of belt of tire-casing. 2018 Jelgava : ISSN 1691-5976 |
AEC | Artyukhov, Artem E. (16.67%); Artyukhova, Nadiia (16.666%); Ostroha, Ruslan (16.666%); Yukhymenko, Mykola (16.666%); Bocko, Jozef (16.666%); Krmela, Jan (16.666%): Convective Drying in the Multistage Shelf Dryers: Theoretical Bases and Practical Implementation. 2019 London : |
ADM | Artyukhov, Artem E. (33.334%); Krmela, Jan (33.333%); Gavrylenko, O.M. (33.333%): Evaluation of the impact made by the hydrodynamic regime of the granulation equipment operation on the nanoporous structure of N4HNO3 granules. Sumy : ISSN 2306-4277 |
ADM | Artyukhova, Nadiia (50%); Krmela, Jan (50%): Nanoporous structure of the ammonium nitrate granules at the final drying: The effect of the dryer operation mode. Sumy : ISSN 2306-4277 |
AFC | Krmela, Jan (33.334%); Krmelová, Vladimíra (33.333%); Kasperovich, Andrei (33.333%): Computational modeling of rubber composite. 2019 Minsk : ISBN 978-985-530-797-7 |
AFH | Artyukhov, Artem E. (25%); Artyukhova, Nadiia (25%); Krmela, Jan (25%); Krmelová, Vladimíra (25%): Compex designing of granulation units with application of computer and software modeling: case "Vortex granulator". 2019 Trenčín : ISBN 978-80-8075-869-1 |
AFH | Artyukhov, Artem E. (25%); Artyukhova, Nadiia (25%); Krmela, Jan (25%); Krmelová, Vladimíra (25%): Granulation machines with highly turbulized flows: creation of software complex for technological design. 2019 Trenčín : ISBN 978-80-8075-869-1 |
AFH | Bobrova, V.V. (25%); Kasperovich, Andrei (25%); Krmela, Jan (25%); Krmelová, Vladimíra (25%): Elastomer modification by means of ionizing radiation. 2019 Trenčín : ISBN 978-80-8075-869-1 |
AFH | Khachaturov, Aram A. (16.67%); Potapov, Evgenii E. (16.666%); Ondrušová, Darina (16.666%); Pajtášová, Mariana (16.666%); Krmela, Jan (16.666%); Krmelová, Vladimíra (16.666%): The influence of iron-ore concentrate on the kinetics of curing and aging processes of butadiene-styrene rubber based blends in presence of different acceleratora. 2019 Trenčín : ISBN 978-80-8075-869-1 |
AFH | Krmelová, Vladimíra (11.112%); Gavendová, Mária (11.111%); Zatroch, Tomáš (11.111%); Krmela, Jan (11.111%); Dubec, Andrej (11.111%); Bizubová, Bibiána (11.111%); Kleščík, Michal (11.111%); Balogová, Alena (11.111%); Pedraza, Luis Alberto Rivera (11.111%): Structure and properties of nucleated polypropylene fibres. 2019 Trenčín : ISBN 978-80-8075-869-1 |
AFH | Legerská, Jela (33.334%); Krmela, Jan (33.333%); Ondrušová, Darina (33.333%): Valuation of heat and dynamic moisture transfer of knitted fabrics. 2019 Trenčín : ISBN 978-80-8075-869-1 |
AFH | Skalková, Petra (20%); Dubec, Andrej (20%); Pagáčová, Jana (20%); Krmela, Jan (20%); Martinec, Jakub (20%): Surface properties of non-black fillers. 2019 Trenčín : ISBN 978-80-8075-869-1 |
ADM | Sklabinsky, Vsevolod (25%); Artyukhov, Artem E. (25%); Kononenko, Mykola (25%); Krmela, Jan (25%): Decay of the melt stream during dispersion in granulation devices. Belehrad : ISSN 2217-7426 |
AFC | Artyukhov, Artem E. (50%); Krmela, Jan (50%): The Stabilization of the Drop Formation Process in the Vortex Granulator. 2019 Lviv : ISSN 2618-0227 |
AFC | Artyukhova, Nadiia (50%); Krmela, Jan (50%): Improvement of the Convective Drying Efficiency in Devices with Weighted Layer: Multistage Drying in the Shelf Devices. 2019 Lviv : ISSN 2618-0227 |
AFC | Artyukhova, Nadiia (20%); Ostroha, Ruslan (20%); Yukhymenko, Mykola (20%); Krmela, Jan (20%); Krmelová, Vladimíra (20%): Final drying of the porous ammonium nitrate in the shelf dryers: impact of the granules flow constraint degree on the nanoporous structure quality. 2019 Sumy : ISBN 978-1-7281-2830-6 |
ADC | Kopal, Ivan (20%); Harničárová, Marta (20%); Valíček, Jan (20%); Krmela, Jan (20%); Lukáč, Ondrej (20%): Radial basis function neural network-based modeling of the dynamic thermo-mechanical response and damping behavior of thermoplastic elastomer systems. Bazilej : ISSN 2073-4360 |
ADE | KRMELA, J. (80%) a V. KRMELOVÁ (20%). The safety at work in experiments of polymers and composites. Zeszyty Naukowe Wyższej Szkoły Zarządzania Ochroną Pracy w Katowicach. 2019 15(1), 69–77. ISSN 1895-3794. |
AEC | Kopal, Ivan (14.29%); Vršková, Juliána (14.285%); Harničárová, Marta (14.285%); Valíček, Jan (14.285%); Ondrušová, Darina (14.285%); Krmela, Jan (14.285%); Hybler, Peter (14.285%): ATR-FTIR Analysis of Melamine Resin, Phenol-Formaldehyde Resin and Acrylonitrile-Butadiene Rubber Blend Modified by High-Energy Electron Beam Radiation. 2020 Cham : ISBN 978-3-030-39062-4 |
AEC | Krmelová, Vladimíra (11.112%); Kopal, Ivan (11.111%); Gavendová, Mária (11.111%); Labaj, Ivan (11.111%); Krmela, Jan (11.111%); Harničárová, Marta (11.111%); Valíček, Jan (11.111%); Hybler, Peter (11.111%); Zatroch, Tomáš (11.111%): A Study of the Effect of the Quinacridone Pigment Content and Storage Time on the Process of Crystallization of Pre-oriented Polypropylene/Quinacridone Fibres. 2020 Cham : ISBN 978-3-030-39062-4 |
AFD | Bobrova, V.V. (20%); Kasperovich, Andrei (20%); Mozyrev, A. (20%); Krmela, Jan (20%); Krmelová, Vladimíra (20%): Elastomer modification by means of ionizing radiation. 2020 Bristol : ISSN 1757-899X |
AFD | Krmelová, Vladimíra (12.5%); Gavendová, Mária (12.5%); Zatroch, Tomáš (12.5%); Krmela, Jan (12.5%); Dubec, Andrej (12.5%); Bizubová, Bibiána (12.5%); Kleščík, Michal (12.5%); Balogová, Alena (12.5%): Structure and properties of nucleated polypropylene fibres. 2020 Bristol : ISSN 1757-899X |
AFD | Legerská, Jela (33.334%); Ondrušová, Darina (33.333%); Krmela, Jan (33.333%): Evaluation of thermal insulation properties and dynamic moisture transfer of knitted fabrics. 2020 Bristol : ISSN 1757-899X |
AFD | Skalková, Petra (20%); Dubec, Andrej (20%); Pagáčová, Jana (20%); Krmela, Jan (20%); Martinec, Jakub (20%): Surface properties of non-black fillers. 2020 Bristol : ISSN 1757-899X |
AFD | Artyukhov, Artem E. (25%); Artyukhova, Nadiia (25%); Krmela, Jan (25%); Krmelová, Vladimíra (25%): Granulation machines with highly turbulized flows: creation of software complex for technological design. 2020 Bristol : ISSN 1757-899X |
AFD | Artyukhov, Artem E. (25%); Artyukhova, Nadiia (25%); Krmela, Jan (25%); Krmelová, Vladimíra (25%): Complex designing of granulation units with application of computer and software modeling: case “Vortex granulator”. 2020 Bristol : ISSN 1757-899X |
ADC | Matejíčka, Ladislav (100%): On a Conjecture of Alzer, Berg, and Koumandos. Bazilej : ISSN 2227-7390 |
ADM | Pozovnyi, Oleksandr (20%); Zahorulko, Andryi (20%); Krmela, Jan (20%); Artyukhov, Artem E. (20%); Krmelová, Vladimíra (20%): Calculation of the Characteristics of the Multi-gap Seal of the Centrifugal Pump, in Dependence on the Chambers’ Sizes. Ústí nad Labem : ISSN 1213-2489 |
ADM | Bakošová, Alžbeta (33.334%); Krmela, Jan (33.333%); Handrik, Marián (33.333%): Computing of truss structure using MATLAB. Ústí nad Labem : ISSN 1213-2489 |
AEC | Harničárová, Marta (16%); Valíček, Jan (12%); Kušnerová, Milena (12%); Kopal, Ivan (12%); Litecká, Juliána (12%); Kadnár, Milan (12%); Kmec, Ján (12%); Palková, Zuzana (12%): Prediction of shortening and material grain size after extrusion using the ecap method. 2020 Baech : ISBN 978-3-0357-3546-8 |
BBA | Artyukhov, Artem E. (25%); Krmela, Jan (25%); Artyukhova, Nadiia (25%); Ostroha, Ruslan (25%): Modeling of the aerodisperse systems hydrodynamics in devices with directional motion of the fluidized bed. 2020 Hershey : ISBN 978-1-7998-3479-3 |
ADM | Matejíčka, Ladislav (100%): A solution to fourth QI's conjecture on a complete monotonicity. Petrozavodsk : ISSN 2306-3432 |
AEC | Artyukhov, Artem E. (50%); Krmela, Jan (50%): Багатошарові ґранули аміячної селітри з наноструктурованими пористими шарами: технологія виробництва та показники якости. 2020 Kijev : ISSN 1816-5230 |
AEC | Artyukhova, Nadiia (33.334%); Krmela, Jan (33.333%); Krmelová, Vladimíra (33.333%): Фінальне сушіння ґранул аміячної селітри з нанопористою структурою в багатоступеневих поличних апаратах: конструктивне виконання та технологічні параметри. 2020 Kijev : ISSN 1816-5230 |
ADM | Krmela, Jan (70%); Artyukhova, Nadiia (15%); Artyukhov, Artem E. (15%): Investigation of the Convection Drying Process in a Multistage Apparatus with a Differential Thermal Regime. Ústí nad Labem : ISSN 1213-2489 |
ADM | Artyukhov, Artem E. (33.334%); Krmela, Jan (33.333%); Krmelová, Vladimíra (33.333%): Manufacturing of vortex granulators: simulation of the vortex fluidized bed functioning under the disperse phase interaction in the constrained motion. Ústí nad Labem : ISSN 1213-2489 |
AFC | Artyukhov, Artem E. (33.334%); Berladir, K.V. (33.333%); Krmela, Jan (33.333%): Technological Basis for the Production of Ammonium Nitrate with a Nanoporous Surface and Near-surface Structure in Combined Flow Motion Devices. 2020 Piscataway : ISBN 978-1-7281-8506-4 |
AFC | Artyukhova, Nadiia (33.334%); Krmela, Jan (33.333%); Krmelová, Vladimíra (33.333%): Quality Indicators of Ammonium Nitrate with Nanoporous Surface Structure: Final Drying Stage. 2020 Piscataway : ISBN 978-1-7281-8506-4 |
AFC | Krmela, Jan (75%); Krmelová, Vladimíra (11%); Gavendová, Mária (5%); Bakošová, Alžbeta (5%); Kasperovich, Andrei (2%); Sadjiep, S. (2%): Methods for determining the physico-mechanical properties of polymers. 2020 Minsk : ISBN 978-985-530-863-9 |
ADC | Kopal, Ivan (16%); Vršková, Juliána (12%); Bakošová, Alžbeta (12%); Harničárová, Marta (12%); Labaj, Ivan (12%); Ondrušová, Darina (12%); Valíček, Jan (12%); Krmela, Jan (12%): Modelling the stiffness-temperature dependence of resin-rubber blends cured by high-energy electron beam radiation using global search genetic algorithm. Bazilej : ISSN 2073-4360 |
AFC | Jilek, Petr (40%); Krmela, Jan (40%); Berg, Jan (20%): Modification of the adhesive force on a silvehicle by reducing the radial force reaction of the wheels. 2020 Katowice : ISBN 978-83-959742-0-5 |
AFC | Artyukhova, Nadiia (33.334%); Artyukhov, Artem E. (33.333%); Krmela, Jan (33.333%): Final Drying of Ammonium Nitrate with Nanoporous Structure in Gravitational Shelf Dryers: Hydrodynamic and Thermodynamic Conditions. 2020 Cham : ISBN 978-3-030-52267-4 |
ADE | Artyukhova, Nadiia (40%); Krmela, Jan (40%); Artyukhov, Artem E. (20%): Investigation of the Drying Process in a Multistage Shelf Device:Program Realization of a Theoretical Model. Taiwan : ISSN 2233-7857 |
ADE | Artyukhov, Artem E. (50%); Krmela, Jan (50%): Investigation of the Drop Deformation Conditions in a Vortex Granulator: Theoretical Model and Software for Calculation. Perugia : ISSN 2005-4262 |
AFG | Artyukhova, Nadiia (33.334%); Krmela, Jan (33.333%); Krmelová, Vladimíra (33.333%): Final drying of ammonium nitrate granules with nanoporous structure in multistage shelf devices: constructive design and technological pameters. 2019 Kijev : ISBN 978-966-02-9004-4 |
AFG | Artyukhov, Artem E. (50%); Krmela, Jan (50%): Multilayer granules ofammonium nitrate with nanostructured porous layers: technology of production and indicators of quality. 2019 Kijev : ISBN 978-966-02-9004-4 |
ADC | ARTYUKHOV, A. (25%), N. ARTYUKHOVA (25%), J. KRMELA (25%) a V. KRMELOVÁ (25%). V. Ammonium nitrate with nanoporous structure: production methods, phase composition and morphological features of the surface. Appl. Nanosci. [online]. 2021. DOI: 10.1007/s13204-021-01800-z. ISSN: 2190-5509, eISBN: 2190-5517. SPRINGER HEIDELBERG, GERMANY. Q3 – AIS, 2020: IF 3,674 A špičková mezinárodní kvalita - Early Access |
AFC | Artyukhova, Nadiia (33.334%); Krmela, Jan (33.333%); Krmelová, Vladimíra (33.333%): Theoretical basics of final drying of ammonium nitrate with nanoporous structure in gravitational shelf dryers. 2021 Cham : ISBN 978-3-030-74740-4 ISSN 1867-4941 |
AFC | Artyukhova, Nadiia (25%); Krmela, Jan (25%); Krmelová, Vladimíra (25%); Artyukhov, Artem E. (25%): Methods for controlling the properties of nanoporous layers in granules of porous ammonium nitrate: stage of drying. 2021 Cham : ISBN 978-3-030-74740-4 ISSN 1867-4941 |
ADM | Krmela, Jan (25%); Hovorun, Tatyana (25%); Berladir, K.V. (25%); Artyukhov, Artem E. (25%): Increasing the Structural Strength of Corrosion-resistant Steel for Elastic Components of Diaphragm Compressor. Ústí nad Labem : ISSN 1213-2489 |
ADM | Krmela, Jan (20%); Hovorun, Tetiana (20%); Berladir, Kristina (20%); Artyukhov, Artem E. (20%); Kasian, Serhii (20%): Influence of Nitrocarburizing on Increasing the Service Life of Elastic Elements of Direct-Flow Valves. Ústí nad Labem : ISSN 1213-2489 |
ADM | Artyukhova, Nadiia (17%); Krmela, Jan (17%); Artyukhov, Artem E. (17%); Gavendová, Mária (17%); Krmelová, Vladimíra (16%); Bakošová, Alžbeta (16%): Technology for porous ammonium nitrate production modeling of drying machines' operating modes. Warszawa : ISSN 2300-1917 |
ADM | Artyukhova, Nadiia (20%); Krmela, Jan (20%); Krmelová, Vladimíra (20%); Artyukhov, Artem E. (20%); Gavendová, Mária (20%): Fluidized bed in gravitational shelf dryers: optimization calculation. Warszawa : ISSN 2300-1917 |
AFC | Krmela, Jan (60%); Bakošová, Alžbeta (15%); Krmelová, Vladimíra (20%); Sadjiep, S. (5%): Drone propeller blade material optimization using modern computational method. 2021 Jelgava : ISSN 1691-3043 |
AFC | Artyukhov, Artem E. (25%); Lytvynenko, Volodymyr (25%); Krmela, Jan (25%); Krmelová, Vladimíra (25%): Thermodynamic Calculation of Vortex Granulator Operation for Producing of Ammonium Nitrate with Nanoporous Structure. 2021 Cham : ISBN 978-3-030-51905-6 |
ADM | Jilek, Petr (40%); Krmela, Jan (40%); Berg, Jan (20%): Modification of the adhesive force by changing the radial reaction on vehicle wheels. Gliwice : ISSN 2300-861X |
ADC | Dubec, Andrej (20%); Kováčiková, Petra (20%); Krmela, Jan (20%); Krmelová, Vladimíra (20%); Artyukhov, Artem E. (20%): Fracture analysis of high-strength screw for highway construction. Bazilej : ISSN 1996-1944 |
ADC | Levchenko, Dmytro (20%); Manzharov, Andrii (20%); Artyukhov, Artem E. (20%); Artyukhova, Nadiia (20%); Krmela, Jan (20%): Comparative Exergy Analysis of Units for the Porous Ammonium Nitrate Granulation. Bazilej : ISSN 1996-1073 |
ADC | Yukhymenko, Mykola (16.67%); Artyukhov, Artem E. (16.666%); Ostroha, Ruslan (16.666%); Artyukhova, Nadiia (16.666%); Krmela, Jan (16.666%); Bocko, Jozef (16.666%): Multistage Shelf Devices with Fluidized Bed for Heat-Mass Transfer Processes: Experimental Studies and Practical Implementation. Bazilej : ISSN 2076-3417 |
ADM | Vakal, Serhii (10%); Yanovska, Anna (10%); Vakal, Viktoriia (10%); Artyukhov, Artem E. (9%); Shkola, Viktoriia (9%); Yarova, Tetiana (9%); Dmitrikov, Velerii (9%); Krmela, Jan (25%); Maluvanyy, Myroslav (9%): Minimization of Soil Pollution as a Result of the Use of Encapsulated Mineral Fertilizers. Lublin : ISSN 2299-8993 |
AFC | Krmela, Jan (25%); Artyukhov, Artem E. (25%); Krmelová, Vladimíra (25%); Pozovnyi, Oleksandr (25%): Determination of material parameters of rubber and composites for computational modeling based on experiment data. 2020 Sumy : |
BFA | Krmela, Jan (20%); Krmelová, Vladimíra (20%); Dubec, Andrej (20%); Skalková, Petra (20%); Gavendová, Mária (20%): Cyclic Testing of Composites and Textile Cords – Design of Experiment Methods and Results for Practical Use. 2021 Porto : |
BFA | Skalková, Petra (16.67%); Labaj, Ivan (16.666%); Vršková, Juliána (16.666%); Pagáčová, Jana (16.666%); Pajtášová, Mariana (16.666%); Krmela, Jan (16.666%): Preparation of cellulose filled elastomer blends and study their properties. 2021 Porto : |
ADE | Tchuigwa B. S., Sadjiep (33.334%); Krmela, Jan (33.333%); Pokorný, Jan (33.333%): A literature review on tier requirements. Pardubice : ISSN 1801-674X |
AFD | Krmela, Jan (20%); Krmelová, Vladimíra (20%); Artyukhov, Artem E. (20%); Sadjiep, S. (20%); Bakošová, Alžbeta (20%): Computational Simulation of the Shear Test of a Multilayered Long-Fibre Composite with a Polymer Matrix. 2021 Bristol : ISSN 1757-899X |
AFD | Skalková, Petra (20%); Krmelová, Vladimíra (20%); Krmela, Jan (20%); Ondrušová, Darina (20%); Crkoň, A. (20%): Composite Materials with Epoxy Matrix and Their Properties. 2021 Bristol : ISSN 1757-899X |
AFD | Krmelová, Vladimíra (20%); Gavendová, Mária (20%); Krmela, Jan (20%); Skalková, Petra (20%); Lokšík, E. (20%): Thermal and mechanical characterization of drawn polypropylene fibres. 2021 Bristol : ISSN 1757-899X |
AFD | Artyukhova, Nadiia (25%); Krmela, Jan (25%); Krmelová, Vladimíra (25%); Artyukhov, Artem E. (25%): Drying Machines with Combined Hydrodynamic Regimes. 2021 Bristol : ISSN 1757-899X |
Ohlasy
Názov kategórie | Konkrétny názov |
---|---|
1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Kopal, Ivan (20%); Harničárová, Marta (20%); Valíček, Jan (20%); Krmela, Jan (20%); Lukáč, Ondrej (20%): Radial basis function neural network-based modeling of the dynamic thermo-mechanical response and damping behavior of thermoplastic elastomer systems. Bazilej : ISSN 2073-4360 (CC, Polymers, IF=3,164, Q1) DOI: 10.3390/polym11061074 |
1 - citácie v zahraničných publikáciách registrované v citačných indexoch Web of Science a v databáze SCOPUS | Kopal, Ivan (20%); Harničárová, Marta (20%); Valíček, Jan (20%); Krmela, Jan (20%); Lukáč, Ondrej (20%): Radial basis function neural network-based modeling of the dynamic thermo-mechanical response and damping behavior of thermoplastic elastomer systems. Bazilej : ISSN 2073-4360 (CC, Polymers, IF=3,164, Q1) DOI: 10.3390/polym11061074 |
Iné výstupy (napr. e-learning, webové stránky, virtuálne laboratórium, školenia, kurzy, workshop a pod.)
Názov výstupu | Opis výstupu | Link |
---|---|---|
webová stránka so sťažením voľne dostupných VŠ skrípt a VŠ učebníc pre študentov univerzít | 2 VŠ skriptá a 3 VŠ učebnice s on-line prístupom vytvorené v rámci tohto projektu (Experiments and Computational Modelling of Tires a Ergonomics Modify Conditions of Work and The Safety at Work) a nad rámec projektu (zohľadnenie výsledkov z projektu a ich uplatnenie v ďalšom výskume). Jedny skriptá majú poďakovanie aj inému projektu (zahrnutie a prepojenie poznatkov z dvoch projektov). Preto celkovo je podiel riešenia projektu KEGA vo výstupoch ako celku 88 %. Jazyk publikácií je český a anglický (určený aj pre Erasmus študentov), preto majú výstupy medzinárodný dopad, nakoľko ich môžu využiť aj študenti univerzít mimo Slovenskej republiky ako sú napr. študenti spolupracujúcich inštitúcií na projekte a študenti v Českej republike. | http://krmela.wz.cz/contact.html |
Záverečné hodnotenie príslušnej komisie KEGA
Splnil ciele excelentne (s dosiahnutím celospoločenských prínosov).